Roscoe's SLOBs

[Cogito]

I'll know more soon

I still need to build the other one

Which one do you like better?

[Roscoe Primrose]

Which one do you like better?

The SLOB. It's built so the main baffle is easily replaceable, I plan to try it with the 414/802-32B on a baffle at some point. I also have 12" co-axials by University, Tannoy & B&C to try, along with an 8" co-axial and several 8" full-range drivers. So many drivers, so little time

Roscoe

[Roscoe Primrose]

These pics are a little overdue, but here they are anyway.... I made the wings a bit deeper, and rounded the corners to help me avoid injury (again)



I also changed the subs to the Dayton PA-465s, which have a larger Xmax & a bit higher qts, the bass is quite a bit more solid now. I could live with these for a while

Roscoe

[Roscoe Primrose]

Sometimes it's the simple things that make a huge difference...



Before adding the dowels as cross-braces the wings flapped so much with low bass playing that you could see it, now you can barely feel it. I think I'm going to need to redo the bass EQ now

Roscoe

[Cogito]

Yes, there is a huge improvement in the bass since I was there few months ago......

[Roscoe Primrose]

Going to move the posts specific to my SLOBs here from the What do you know about SLOBS? thread, and add new ones as more development occurs..

Roscoe

[Roscoe Primrose]

OK, so I'm not the guy you need to see about finishing wood... But, I think they look a bit better than bare plywood...

Roscoe

[Roscoe Primrose]

Ok, back together after a second coat of stain on the baffles. Hopefully we won't scare anyone away this year just based on cosmetics alone....

[HAL]

Looks good to me. Ready for the show!