DCAudioDIY.com

DC Area Audio DIYer's Community
It is currently October 31st, 2024, 7:16 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Room treatments
PostPosted: December 12th, 2020, 11:40 am 
Offline
User avatar

Joined: February 28th, 2013, 3:31 pm
Posts: 1806
In my new house I have a dedicated audio room which for the first time allows me to properly treat the surfaces for best audio performance. The room is 20' long by 16' wide with a 9' ceiling. During construction I specified a Berber carpet and heavy felt underlayment. There are three windows that have textured shades that can be run all the way down.

Since I don't know a whole lot about room acoustics, I went to the company Sonitus USA for analysis and products. They have a room calculator on their site that allows you to describe the room and then pick the treatment scenario at three price levels. Here is a link: https://www.sonitususa.com/product/home ... ic-systems

Yesterday I received the order but because I am still unpacking and it is the holidays it will probably be a while before they get installed. I'm including a list of things I ordered and also a photos of the boxes that arrived in my garage. I ordered them early because they had a Black Friday sale with 10% off and free shipping. Looking at the stack of boxes you can see why the free freight was important. Further developments as they happen.


Attachments:
Sonitus components.pdf [20.3 KiB]
Downloaded 606 times
Sonitus shipment.jpg
Sonitus shipment.jpg [ 462.42 KiB | Viewed 9605 times ]
Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 12th, 2020, 12:10 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1747
Location: Parkville, Maryland
tomp wrote:
In my new house I have a dedicated audio room which for the first time allows me to properly treat the surfaces for best audio performance. The room is 20' long by 16' wide with a 9' ceiling. During construction I specified a Berber carpet and heavy felt underlayment. There are three windows that have textured shades that can be run all the way down.

Since I don't know a whole lot about room acoustics, I went to the company Sonitus USA for analysis and products. They have a room calculator on their site that allows you to describe the room and then pick the treatment scenario at three price levels. Here is a link: https://www.sonitususa.com/product/home ... ic-systems

Yesterday I received the order but because I am still unpacking and it is the holidays it will probably be a while before they get installed. I'm including a list of things I ordered and also a photos of the boxes that arrived in my garage. I ordered them early because they had a Black Friday sale with 10% off and free shipping. Looking at the stack of boxes you can see why the free freight was important. Further developments as they happen.

Just a word from my experience in the commercial sector doing noise-control projects that include night clubs and auditoriums. I've also helped audiophiles as well with "hot" rooms.

A little goes a long way. It appears that you ordered the "whole store" when you probably do not need all of it.

If you want to hear the room to evaluate it -- play some music or have your wife just talk and make some clapping noises while you listen with only one ear. Without both ears in play your brain can't do its magic and you will hear the room.
I can say this for certain -- you will not like a completely dead room. Go slow and temporary until you get a result that serves the music. You could also visit the "live-end/dead-end" methodology before you make it permanent.

_________________
Walt


Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 12th, 2020, 3:13 pm 
Offline
User avatar

Joined: February 28th, 2013, 3:31 pm
Posts: 1806
This was designed by the guy who has won many awards for room treatment. It is not just absorbers which I agree would be an overly dead room. It is a combination of absorbers, diffusers, bass traps and combo diffusers/absorbers. They are all described on the site.

The placement was designed with the room dimensions, windows, and carpet as inputs. When I first walked the room doing the clap test there were areas of significant "slap echo". The nice thing about this system is that there are magnetic mounts for most of the pieces. If they have to be moved it is not like they are glued to the wall. That way the room can be fine tuned by ear with different types of music. Not only can they be moved but changes of the types can also be make. The only fix would be to fill a few holes that hold the mounts and touch up with paint.


Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 12th, 2020, 4:19 pm 
Offline
User avatar

Joined: January 15th, 2015, 7:19 am
Posts: 1706
Location: Baltimore MD
I think your brain is the only room treatment you need unless you are in a concrete hall


Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 12th, 2020, 5:41 pm 
Offline
User avatar

Joined: February 28th, 2013, 3:31 pm
Posts: 1806
Interesting comment Paul that flies in the face of most experienced acousticians who all say the the biggest problem in reproduced sound is the room itself. I have been at seminars with Leo Baranek and other big name acousticians who bemoan the degradation of sound in poor rooms. Here are just a couple of links to articles on that subject. If you take the time to do some research you will find a lot of other corroborating information.

Electronic compensation usually is successful only at frequencies where the wavelength is longer than the room dimensions. At frequencies above that you will get different results at different locations for the same applied correction. The best results are achieved when the room is properly balanced with combinations of diffusion and absorption.


Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 12th, 2020, 6:56 pm 
Offline
User avatar

Joined: July 24th, 2015, 4:17 pm
Posts: 1747
Location: Parkville, Maryland
tomp wrote:
This was designed by the guy who has won many awards for room treatment. It is not just absorbers which I agree would be an overly dead room. It is a combination of absorbers, diffusers, bass traps and combo diffusers/absorbers. They are all described on the site.

The placement was designed with the room dimensions, windows, and carpet as inputs. When I first walked the room doing the clap test there were areas of significant "slap echo". The nice thing about this system is that there are magnetic mounts for most of the pieces. If they have to be moved it is not like they are glued to the wall. That way the room can be fine tuned by ear with different types of music. Not only can they be moved but changes of the types can also be make. The only fix would be to fill a few holes that hold the mounts and touch up with paint.

Caveat Emptor!

_________________
Walt


Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 15th, 2020, 7:04 pm 
Offline

Joined: July 25th, 2013, 9:41 am
Posts: 78
Excellent move, Tom!

I'm always surprised to see people spend $100s and $1,000 on crossover capacitors, coils, resistors, fancy speaker wire and interconnects, etc., etc. and never bother a penny to treat their room. You are doing it right!

Looking forward to more pictures when you get moving on the project.

-D


Top
 Profile  
 
 Post subject: Re: Room treatments
PostPosted: December 17th, 2020, 10:12 am 
Offline
User avatar

Joined: December 14th, 2013, 2:19 pm
Posts: 985
Glad to see that you're moving forward with this, Tom. Can't wait to make the trip and see/hear the finished project!

Stuart


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group