DCAudioDIY.com
http://www.dcaudiodiy.com/phpBB3/

33uF 16V cap anyone?
http://www.dcaudiodiy.com/phpBB3/viewtopic.php?f=7&t=718		 Page 1 of 1
Author:  justinis [ September 17th, 2016, 1:40 pm ]
Post subject:  33uF 16V cap anyone?
I was hoping to finish a project this weekend but realized I didn't order enough of one of the parts. :crazy: Anybody happen to have a 33uF, 16V (or greater) electrolytic capacitor they would be willing to part with? I'd be happy to give you a couple bucks for the trouble. This is for a recap job so I'd prefer something mfg in the last 5 years. I'm in DC but I'd be willing to drive pretty far to get this thing done! Unfortunately radioshack doesn't carry this size (shocker). I called a few local repair shops but none of them had one either.

Thanks!
Author:  SoundMods [ September 17th, 2016, 2:16 pm ]
Post subject:  Re: 33uF 16V cap anyone?
The best I can come up with is 22-ufd (7 pieces) and 10-ufd (5 pieces) paralleled together that will give 32-ufd or better at 35-wvdc.

These are new Nichicon Cerafine caps with a great rep for audio applications.

That's the good news -- the bad news is that I live in Baltimore County off the northeast corner of Baltimore City.

I have a C meter so we can test for values although I expect that there is plenty of wiggle room in terms of the value needed.
Author:  justinis [ September 17th, 2016, 2:27 pm ]
Post subject:  Re: 33uF 16V cap anyone?
SoundMods wrote:
The best I can come up with is 22-ufd (7 pieces) and 10-ufd (5 pieces) paralleled together that will give 32-ufd or better at 35-wvdc.

These are new Nichicon Cerafine caps with a great rep for audio applications.

That's the good news -- the bad news is that I live in Baltimore County off the northeast corner of Baltimore City.

I have a C meter so we can test for values although I expect that there is plenty of wiggle room in terms of the value needed.


Thanks so much. I actually have a 22 ufd and a 10 ufd myself; I think I'll just do what you recommend to get this thing done. Thanks for being willing!
Author:  SoundMods [ September 17th, 2016, 2:46 pm ]
Post subject:  Re: 33uF 16V cap anyone?
Go for it!
Author:  tomp [ September 17th, 2016, 3:13 pm ]
Post subject:  Re: 33uF 16V cap anyone?
I have new 33uf at 16V Nichicons. How many do you need? I'll just put them in an envelope to you. They are small.

Tom
Author:  justinis [ September 17th, 2016, 3:29 pm ]
Post subject:  Re: 33uF 16V cap anyone?
tomp wrote:
I have new 33uf at 16V Nichicons. How many do you need? I'll just put them in an envelope to you. They are small. Tom


Just need one! I'll PM you!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/