DCAudioDIY.com http://www.dcaudiodiy.com/phpBB3/ |
|
FREE DIY MTM Speakers http://www.dcaudiodiy.com/phpBB3/viewtopic.php?f=7&t=1297 |
Page 1 of 1 |
Author: | Cogito [ November 18th, 2018, 7:30 pm ] |
Post subject: | FREE DIY MTM Speakers |
Bought the kit from Parts Express couple of years ago from the bedroom TV, but never got around to finishing them. Assembled both cabinets but mounted drivers in only one of the cabinets. Should have all parts necessary. https://www.parts-express.com/tritrix-mtm-tl-tower-speaker-components-and-cabinet-kit-pair--300-702 Attachment:
|
Author: | mix4fix [ November 18th, 2018, 7:50 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
I'll take it. |
Author: | Cogito [ November 18th, 2018, 8:21 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
mix4fix wrote: I'll take it. Sure. |
Author: | dkalsi [ November 20th, 2018, 3:43 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
are these gone? |
Author: | mix4fix [ November 20th, 2018, 3:56 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
I already responded. |
Author: | mix4fix [ December 2nd, 2018, 9:28 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
Picked up the cabinets. Waiting for the rest of the pieces. 2 275-075 Dayton Audio DC28FS-8 shielded silk some tweeters 4 295-302 Dayton Audio DC130BS-4 classic shielded woofers 2 266-836 2.50mH 18 AWG air core inductors 2 266-818 0.60mH 18 AWG air core inductors 2 027-428 Dayton Audio DMPC-10 10uF-250V polypropylene caps 2 027-436 Dayton Audio DMPC-20 20uF-250V polypropylene caps 2 004-2.4 Dayton Audio DNR-2.4 ohm 10W resistors 2 0915-114 Gold binding post pairs 2 260-317 Acousta-Stuf Polyfill 1 lb. bags |
Author: | Cogito [ December 8th, 2018, 8:17 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
found the second set of drivers. Sorry, could not find the crossover parts. You can pick up the drivers, send me a PM. |
Author: | mix4fix [ December 18th, 2018, 12:46 pm ] |
Post subject: | Re: FREE DIY MTM Speakers |
Picked up the rest of the drivers. I will order all the missing supplies and start assembling. Thanks to Cogito. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |