DCAudioDIY.com http://www.dcaudiodiy.com/phpBB3/ |
|
Free to a good home, open baffle line arrays... http://www.dcaudiodiy.com/phpBB3/viewtopic.php?f=7&t=1279 |
Page 1 of 1 |
Author: | Roscoe Primrose [ October 20th, 2018, 3:43 pm ] |
Post subject: | Free to a good home, open baffle line arrays... |
18 4" full-range drivers per side, series connection of six groups of three drivers in parallel. I can't remember if the drivers are 4 or 8ohm, impedance will be either 8 or 16ohms. Baffles are curved so that all the drivers are the same distance from the listener with approx 10-12' listening distance. You'll need to measure the radius to be sure, it's been a few years and I don't remember the exact distance I cut them for... These drivers have a bit of a peak in the upper mid-range that you'll need to design/build a notch filter for... Roscoe |
Author: | ratbagp [ October 21st, 2018, 8:18 am ] |
Post subject: | Re: Free to a good home, open baffle line arrays... |
They remind me of arrays I built with the prior 69 cent wonders from Parts Express. I also have a box of the variety that Roscoe shows here but they didn't sound as good to me. Actually I will need to get rid of them along with a lot of other stuff. It looks like we will move back to Australia next year and I will have to scale back. I will probably ask for advice at CAF, particularly at the Friday night soiree. ray |
Author: | mix4fix [ October 23rd, 2018, 1:05 pm ] |
Post subject: | Re: Free to a good home, open baffle line arrays... |
How would they sound at a C.A.F.? |
Author: | Roscoe Primrose [ October 23rd, 2018, 1:10 pm ] |
Post subject: | Re: Free to a good home, open baffle line arrays... |
mix4fix wrote: How would they sound at a C.A.F.? Probably about how they'd sound most other places ![]() |
Author: | Roscoe Primrose [ April 29th, 2019, 5:29 pm ] |
Post subject: | Re: Free to a good home, open baffle line arrays... |
Last chance, or they go to the dump this weekend... Roscoe |
Author: | Pelliott321 [ April 29th, 2019, 7:09 pm ] |
Post subject: | Re: Free to a good home, open baffle line arrays... |
I can see o bonfire |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |