Switch to full style
A place to buy and sell audio gear and parts. NOTE: There is a limit of 2MB per attachment, and a maximum of 3 attachments per message. If you need to post more than 3 attachments, just add another message.
Post a reply

WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 7:33 am

Have tweeters that are a bit edgy, using basic Dayton metalized PP caps. Thinking that better caps might tame them a bit. Could get by with only two, but would like 4:

PPFX
Mundorf
Auricap
Sonicap
Jensen
Jupiter
V-Cap OIMP
whatever.......

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 8:56 am

I have had good luck with PIO's off of ebay
The usual naysayers will be ignored

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 9:00 am

Which PIO caps? The Russian k40Y9 type?

Stuart

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 9:08 am

I have gotten a few. The Russian's seem fine and reasonable. Also motor run caps have a large following
But full disclosure my personal opinion that boutique caps are bogus.

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 9:10 am

Pelliott321 wrote:I have gotten a few. The Russian's seem fine and reasonable. Also motor run caps have a large following
But full disclosure my personal opinion that boutique caps are bogus.



Thanks. Maybe I'll just use some NP Nichicons. Probably I'm imagining any differences.

Kidding! Sorry, I'm in the other camp. Sadly, I hear differences, lots of them. Bad for my wallet!

Stuart

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 9:31 am

I hear differences also, but have decided its not worth it. I like to get rid of the stress

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 9:36 am

Pelliott321 wrote:I hear differences also, but have decided its not worth it. I like to get rid of the stress



I don't blame you one little bit!!!!

Keeps lots more $$$ in your piggy bank for other projects!

More hair on your head also!

It's just that feeling of running sheetrock screws into my ears that makes me keep trying! I listen for detail, soundstage, microdynamics, etc., so revealing tweeters do it for me. Unfortunately, that's a double edged sword demanding fine components upstream!

Stuart

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 10:57 am

I have a cache of 5-ufd/350-wvdc Electronics Concepts caps that in my experience surpass any of the so-called audio-phile caps. Their self-resonance is out beyond 250-kHz.

I can provide you with matched pairs. At 8-ohms the difference in the -3-db crossover point is only 750-Hz. (4,750-Hz -- 4-ufd vs. 4,000-Hz -- 5-ufd).

I can even sort for the lowest values within tolerance to get you closer if you like -- although I found that some overlap works best.

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 12:45 pm

A blast from the past. I have two 8uf 200V Wonder Caps if you are interested.

Tom

Re: WANTED: HIGH QUALITY 4uF 100V+ caps

October 27th, 2015, 3:41 pm

SoundMods wrote:I have a cache of 5-ufd/350-wvdc Electronics Concepts caps that in my experience surpass any of the so-called audio-phile caps. Their self-resonance is out beyond 250-kHz.

I can provide you with matched pairs. At 8-ohms the difference in the -3-db crossover point is only 750-Hz. (4,750-Hz -- 4-ufd vs. 4,000-Hz -- 5-ufd).

I can even sort for the lowest values within tolerance to get you closer if you like -- although I found that some overlap works best.


I wouldn't mind auditioning a pair, if you're amenable. If I like them I'd buy them, if the price is right.....

BTW, I'm using 2nd order Butterworth filters: 4.0uF & 0.51mH for 3500, so even 4.7uF & 0.51 = moves me to 3250Hz, a little low. If there are ~4.5uF caps in the bunch, it might be better.

Thanks

Stuart
Post a reply