| DCAudioDIY.com http://www.dcaudiodiy.com/phpBB3/ |
|
| MDF for Speaker Building http://www.dcaudiodiy.com/phpBB3/viewtopic.php?f=5&t=1721 |
Page 1 of 1 |
| Author: | brombo [ September 29th, 2020, 6:07 pm ] |
| Post subject: | MDF for Speaker Building |
If you are looking for MDF for speaker building look at the Woodworkers Club in Rockville - https://woodworkersclub.com/wood/plywood/ In addition to regular MDF they have TruPan (a form of MDF) in 1 and 1 1/2 inch thicknesses. Also check out the other woods available. |
|
| Author: | brombo [ September 29th, 2020, 6:11 pm ] |
| Post subject: | Re: MDF for Speaker Building |
Also I forget to mention they have a panel saw and will cut the MDF to smaller (lighter) sizes. I got a 4'x8' sheet of 1 inch TruPan and had them cut it into 4 2'x4' pieces. |
|
| Author: | tomp [ September 29th, 2020, 7:13 pm ] |
| Post subject: | Re: MDF for Speaker Building |
With TruPan being lighter, I winder how it does as far as damping the vibrations? |
|
| Author: | brombo [ September 29th, 2020, 8:19 pm ] |
| Post subject: | Re: MDF for Speaker Building |
They say it is 20% lighter. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|