Re: Open Baffle Planar servo sub speaker project
Posted: March 23rd, 2019, 11:10 am
Does that mean Roscoe paid him because there are several DIY room videos?
DCAudioDIY.com
DC Area Audio DIYer's Community
http://www.dcaudiodiy.com/phpBB3/
Open Baffle Planar servo sub speaker project
Page 39 of 40
Re: Open Baffle Planar servo sub speaker project
Posted: March 24th, 2019, 8:59 am
No early on Peter was promoting himself by doing general stuff. Now a days it’s only by subscription. He may do one on spec trying to rain in a sucker
Re: Open Baffle Planar servo sub speaker project
Posted: March 24th, 2019, 11:54 am
Paul,
Thanks for the feedback.
Thanks for the feedback.
Re: Open Baffle Planar servo sub speaker project
Posted: March 24th, 2019, 2:28 pm
So, he charges for posting them on YouTube and collects the revenue for posting them on YouTube?
Re: Open Baffle Planar servo sub speaker project
Posted: March 25th, 2019, 6:31 am
His fee is for video production and posting on his web site. He uses YouTube as a place to store and serv up the video
Re: Open Baffle Planar servo sub speaker project
Posted: March 26th, 2019, 10:44 pm
The Monoliths are setup and The Megaliths are close to being fully setup in the labs. 
Had to get Greg to rebuild the 8 ribbons for The Megaliths and he updated them at the same time. Now to do some new measurements for an updated digital crossover design.
Will see what happens.
Had to get Greg to rebuild the 8 ribbons for The Megaliths and he updated them at the same time. Now to do some new measurements for an updated digital crossover design.
Will see what happens.
Re: Open Baffle Planar servo sub speaker project
Posted: March 27th, 2019, 3:05 pm
When are you going to have a meet?
Re: Open Baffle Planar servo sub speaker project
Posted: March 28th, 2019, 5:17 pm
I had one. It was at CAF2018 in a big room.
You were there.
You were there.
Re: Open Baffle Planar servo sub speaker project
Posted: April 16th, 2019, 10:06 pm
After CAF2018 took feedback from folks and did a redesign of The Monoliths digital crossover. Now all crossovers are acoustic 8th order Linkwitz-Riley alignment.
The system now sounds much cleaner and handles more power.
The system now sounds much cleaner and handles more power.
Re: Open Baffle Planar servo sub speaker project
Posted: August 5th, 2019, 7:54 am
Got the latest GR-NEO3 planar tweeters installed in a new set of baffles for testing. Slightly larger than the original BG NEO3-PDR tweeters.
Now wired up for listening and digital crossover adjustment.
Now wired up for listening and digital crossover adjustment.