Page 5 of 5
Re: Trying out the new Radian LM10n planar speaker
Posted: January 3rd, 2024, 8:06 am
by HAL
Have the updated baffles wired and first measurements done to update the DSP crossover for the LM10n.
The Parasound Z-AMP v3 needs RCA inputs and the dspNexus has XLR, so making some adapter cables. More measurements to integrate the 2x12 OB servo subs once I have all the cables built and installed.
The Monolith II's are updated versions of the speakers I brought to CAF2018.
Re: Trying out the new Radian LM10n planar speaker
Posted: January 3rd, 2024, 8:28 am
by tomp
Here is my go to document from Rane on making interconnect cables.
Re: Trying out the new Radian LM10n planar speaker
Posted: January 3rd, 2024, 8:49 am
by HAL
Tom,
Thanks! Will read it soon.
Re: Trying out the new Radian LM10n planar speaker
Posted: January 3rd, 2024, 11:09 pm
by HAL
The system is playing music.
The GR NEO3 tweeter, Radian Audio LM10n midrange planars and GR-Research and Rythmik Audio 2x12 OB servo subs.
DSP crossover is the dspNexus 2x8 driving two Parasound Z-AMP v3's.
Some final measurements to adjust driver levels and it will be time for some music listening.
Re: Trying out the new Radian LM10n planar speaker
Posted: January 6th, 2024, 9:01 am
by HAL
Did some DSP crossover rework of the Monoliths II with the LM10n planar midrange with the CLIO Pocket system measurements and this is the on-axis farfield response in the room.
Still have room modes to work on below 200Hz and possibly some tweeter response flattening that can be done.