DCAudioDIY.com http://www.dcaudiodiy.com/phpBB3/ |
|
Trying out the new Radian LM10n planar speaker http://www.dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=2209 |
Page 5 of 5 |
Author: | tomp [ January 3rd, 2024, 8:28 am ] | ||
Post subject: | Re: Trying out the new Radian LM10n planar speaker | ||
Here is my go to document from Rane on making interconnect cables.
|
Author: | HAL [ January 3rd, 2024, 8:49 am ] |
Post subject: | Re: Trying out the new Radian LM10n planar speaker |
Tom, Thanks! Will read it soon. |
Author: | HAL [ January 3rd, 2024, 11:09 pm ] | ||
Post subject: | Re: Trying out the new Radian LM10n planar speaker | ||
The system is playing music. The GR NEO3 tweeter, Radian Audio LM10n midrange planars and GR-Research and Rythmik Audio 2x12 OB servo subs. DSP crossover is the dspNexus 2x8 driving two Parasound Z-AMP v3's. Some final measurements to adjust driver levels and it will be time for some music listening.
|
Author: | HAL [ January 6th, 2024, 9:01 am ] | ||
Post subject: | Re: Trying out the new Radian LM10n planar speaker | ||
Did some DSP crossover rework of the Monoliths II with the LM10n planar midrange with the CLIO Pocket system measurements and this is the on-axis farfield response in the room. Still have room modes to work on below 200Hz and possibly some tweeter response flattening that can be done.
|
Page 5 of 5 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |