DCAudioDIY.com http://www.dcaudiodiy.com/phpBB3/ |
|
Balanced to unbalanced converter http://www.dcaudiodiy.com/phpBB3/viewtopic.php?f=4&t=1171 |
Page 1 of 1 |
Author: | tomp [ March 24th, 2018, 8:49 pm ] | ||
Post subject: | Balanced to unbalanced converter | ||
At the DC HiFi Group meeting today, interest was expressed in the balanced to unbalanced converter I built as a project which became an audioXpress article. Unfortunately the two issues of the magazine covering the project are each larger than the 2 MB limit so I cannot load them. Instead, I'm including the schematic and two data sheets on the active devices used. The sheets not only contain info on the ICs but also great info on balanced circuits. They are both still available. Tom http://www.thatcorp.com/datashts/THAT_1 ... asheet.pdf http://www.thatcorp.com/datashts/THAT_1 ... asheet.pdf
|
Author: | tomp [ March 25th, 2018, 11:09 am ] | ||||
Post subject: | Re: Balanced to unbalanced converter | ||||
I broke the article down to bite sized pieces. Here is the first issue:
|
Author: | tomp [ March 25th, 2018, 11:11 am ] | ||||
Post subject: | Re: Balanced to unbalanced converter | ||||
Here are the last three of the second issue.
|
Author: | tomp [ March 25th, 2018, 11:12 am ] | ||
Post subject: | Re: Balanced to unbalanced converter | ||
Here is the first of the second issue. Sorry I got this one inserted backwards.
|
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |